Dry cargo containers are designed to meet the transportation needs of almost all types of general cargo. MOL provides the following features in its dry cargo containers:
 
  • Each container is built in accordance with ISO standards.
  • All containers are inspected and approved by the classification societies such as BV, ABS, Lloyds, NK and NKKK.
  • As our containers are built according to technological specifications that correspond to the requirements of the TIR/CCC agreements, not only is the risk of pilferage significantly reduced, but customs checks that are usually carried out are eliminated, greatly speeds up transit time.
  • Each container is designed not only to meet, but to exceed the strength standards set by the International Convention for Safe Conditions (CSC).
  • Available in a wide range of sizes, from the popular 20’X8’X8’6” and 40’X8’X8’6” dimensions to 40’X8’X9’6” and 45’X8’X9’6.
  • Because tare weight is light and the inner length, width and height are designed for maximum size, payload and internal capacity are considerably increased.
  • To ensure that goods are properly stowed, lashing rings are fitted inside the container and securing eyes are mounted near the door.
  • Through the use of an anti-corrosive steel plate, rusting is minimized, thereby extending the service life of the container.
  • A removable hanger bar mounted on the ceiling of some containers also allows clothing to be transported.
  • The maximum payload is indicated on or near the door. However, this may vary due to the highway weight restrictions in some countries.
  • Small ventilators are mounted on the sides of 20’ and 40’X8’9’6” and 45’ units containers.
 
 
 標準櫃
20 40 45
 冷凍櫃
20 40
 平板櫃
20 40
 開頂櫃
20 40

40’ Steel Dry Container (8’6” High)
Type
40’ (8’6” High Steel) 40’ (8’6” High Steel)
Spec No.
S4-9101S S4-9603S
External Dimensions (L)
12,192 mm (40’0”) 12,192 mm (40’0”)
External Dimensions (W)
2,438 mm (8’0”) 2,438 mm (8’0”)
External Dimensions (H)
2,591 mm(8’6”) 2,591 mm(8’6”)
Internal Dimensions (L)
12,033 mm (39’5”3/4) 12,024 mm (39’5”25/64)
Internal Dimensions (W)
2,352 mm (7’8”5/8) 2,352 mm (7’8”5/8)
Internal Dimensions (H)
2,386 mm (7’9”15/16) 2,393 mm (7’10”7/32)
Interior Capacity
67.5 m3 (2,385 cft) 67.7 m3 (2,391 cft)
Door Opening (W)
2,340 mm(7’8”1/8) 2,340 mm(7’8”1/8)
Door Opening (H)
2,272 mm(7’5”7/16) 2,280 mm(7’5”3/4)
Tare Weight
3,740 kg (8,250 lbs) 3,780 kg (8,330 lbs)
Max. Payload
26,740 kg (5,8950 lbs) 26,700 kg (58,870 lbs)
Max. Gross Weight
30,480 kg (67200 lbs) 30,480 kg (67,200 lbs)
 
40’ Steel Dry Container (9’6” High)
Type
40’ (8’6” High Steel) 40’ (8’6” High Steel)
Spec No.
C4-9101S C4-9802S
External Dimensions (L)
12,192 mm (40’0”) 12,192 mm (40’0”)
External Dimensions (W)
2,438 mm (8’0”) 2,438 mm (8’0”)
External Dimensions (H)
2,896 mm(9’6”) 2,896 mm(9’6”)
Internal Dimensions (L)
12,033 mm (39’5”3/4) 12,032 mm (39’5”11/16)
Internal Dimensions (W)
2,352 mm (7’8”5/8) 2,352 mm (7’8”5/8)
Internal Dimensions (H)
2,691 mm (8’9”15/16) 2,697 mm (8’10”3/16)
Interior Capacity
76.2 m3 (2,690 cft) 76.3 m3 (2,695 cft)
Door Opening (W)
2,340 mm(7’8”1/8) 2,340 mm(7’8”1/8)
Door Opening (H)
2,577 mm(8’5”1/2) 2,585 mm(8’5”3/4)
Tare Weight
3,920 kg (8,640 lbs) 3,900 kg (8,600 lbs)
Max. Payload
26,560 kg (58,560 lbs) 26,580 kg (58,600 lbs)
Max. Gross Weight
30,480 kg (67,200 lbs) 30,480 kg (67,200 lbs)